da Vinci nano

Last updated on May 9th, 2018 at 10:19 am

20171127_NANO 白灰.3516-2

Dimensions: 280 x 378 x 355 mm
Weight: 4.7 KG
Print Technology: Fuse Filament Fabrication (FFF)
Print Material: PLA, TOUGH PLA, PETG
Filament Diameter: 1.75 mm
Nozzle Diameter: 0.3 mm (Orange nano)/ 0.4 mm (White nano)
Print Dimension: 120 x 120 x 120 mm
Print Resolution: 0.1/0.2/0.3 mm (Orange nano)/ 0.1/0.2/0.3/0.4 mm (White nano)
Connectivity: USB 2.0
Print Software: XYZmaker
File Format: .stl / .3w / .3mf
Operating System: Microsoft Windows 7 + / Mac OSX 10.9 +

 

 

 

LED Button and Indicator

Last updated on May 23rd, 2018 at 11:31 am

LED button and indicator

JP_UI10

Solid green: Ready to print.
Flashing green: Receiving data.

Solid red: General error, press to cancel the print and refer to instructions in the software to fix the issue.
Flashing red: Critical error, refer to instructions in the software to solve the issue or reboot the nano.

Solid orange: Printing, press the button to pause. To cancel, press and hold for 5 seconds.
Flashing orange: Paused, press the button once to resume.
Pulsing orange: Print complete, remove the object and press the button once to return to green status.

Overview

Last updated on May 24th, 2018 at 03:05 pm

Product Overview

overview

 

  1. Top cover
  2. Top cover latch
  3. Print bed
  4. Function button / Status indicator
  5. Guide tube
  6. Detection head trigger
  7. Extruder module
  8. Hold-open component
  9. Front cover
  10. Feed module
  11. Filament holder
  12. Power socket
  13. Power switch
  14. USB port

 

 

Error Codes

Last updated on May 24th, 2018 at 01:32 pm
Error code: 0007 - unable to locate spool

The nano is unable to read the sensor chip inside of the spool. Using a philips screwdriver, open the white plastic spool and check that the sensor is seated in the the correct position. The sensor chip tracks the amount of filament you have used, and helps to calculate if you have enough to complete the print. When you purchase new filament supplied by XYZprinting, a sensor chip will also be included in the packaging. Without this sensor chip loaded the nano will not be able to use the filament.

error-0007-02

Error code: 0008 - unable to locate spool

The nano is unable to read the sensor chip inside of the spool. Using a philips screwdriver, open the white plastic spool and check that the sensor is seated in the the correct position. The sensor chip tracks the amount of filament you have used, and helps to calculate if you have enough to complete the print. When you purchase new filament supplied by XYZprinting, a sensor chip will also be included in the packaging. Without this sensor chip loaded the nano will not be able to use the filament.

error-0007-02

Error code: 0011 - problem with heating

There was a problem with the extruder heating. Turn off the nano and check to see if the extruder connector is securely connected. Restart you printer and retry. If you continue to get the same error, contact the XYZprinting service center for support.

Error code: 0014 - problem with heating

There was a problem with the extruder heating. Turn off the nano and check to see if the extruder connector is securly connected. Restart you printer and retry. If you continue to get the same error, contact the XYZprinting service center for support.

Error code: 0016 - spool not properly installed

The nano is unable to read the sensor chip inside of the spool. Using a phillips screwdriver, open the white plastic spool and check that the sensor is seated in the the correct position. The sensor chip tracks the amount of filament you have used, and helps to calculate if you have enough to complete the print. When you purchase new filament supplied by XYZprinting, a sensor chip will also be included in the packaging. Without this sensor chip loaded the nano will not be able to use the filament.

error-0007-02

Error code: 0028 - Spool not found

Spool may not be installed properly. To reinstall the spool, press Unload Filament then Load Filament in the printer dashboard. If you still get the same error, the nano might be unable to read the sensor chip inside of the spool. Using a phillips screwdriver, open the white plastic spool and check that the sensor is seated in the the correct position. The sensor chip tracks the amount of filament you have used, and helps to calculate if you have enough to complete the print. When you purchase new filament supplied by XYZprinting, a sensor chip will also be included in the packaging. Without this sensor chip loaded the nano will not be able to use the filament.

error-0007-02

Error code: 0029 - no filament left in spool

No filament left in spool. Replace spool and sensor chip before printing. The sensor chip tracks the amount of filament you have used, and helps to calculate if you have enough to complete the print. When you purchase new filament supplied by XYZprinting, a sensor chip will also be included in the packaging. Without this sensor chip loaded the nano will not be able to use the filament. When you replace the filament be sure to open the white plastic spool with a phillips screw driver and check that the sensor is seated in the the correct position.

error-0007-02

Error code: 0030 - problem with X-axis motor

Check that the X-axis motor is connected, then check that the X-axis sensor is in the right position and the connector is plugged in.

Error code: 0031 - problem with Y-axis motor

Check that the Y-axis motor is connected, then check that the Y-axis sensor is in the right position and the connector is plugged in.

Error code: 0032 - problem with Z-axis motor

Check that the Z-axis motor is connected, then check that the Z-axis sensor is in the right position and the connector is plugged in.

Error code: 0050 - memory error

Restart the printer, if the error persists, contact the service center for support.

Error code: 0051 - flash ram error

Restart the printer, if the error persists, contact the service center for support.

Error code: 0052 - memory error

Memory in the extruder cannot be read/written. Try replacing the extruder module

Error code: 0201 - printer/computer connection issue

Re-connect the computer with the printer. Alternatively, try swapping the USB cable that connects the computer with the printer.

Printing

Last updated on May 23rd, 2018 at 11:14 am

NOTE: The recommended operating temperature is 15 ℃ ~ 32 ℃ (59 ° F ~ 90 ° F). If the room temperature is above this, please open the front cover to maintain print quality.

Load model

With XYZmaker open, go to File > Open and load you model. Select the model and click the Land icon to make sure the model is sitting on the print bed.

Image 9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Print model

Click File > Print > da Vinci Printer Plugin and a new print window will open up with print settings.

page10_step2_US

 

 

 


Click Prepare

Adjust the print parameters and click Prepare. This will slice the model into layers that the printer uses to print the model.

Image 13

 


Click Print

Check that the sliced file is a complete model and click Print.

Image 14

 


When the print job begins, the printer will print a line on the print bed to ensure the filament is extruding properly.

line wall

Sit back and relax

Be sure to check back regularly on the status of your print.

check list

NOTE

• When the printer starts printing, you can monitor the status by clicking DASHBOARD.
• The recommended operating temperature is 15℃ ~ 32℃ (59 ℉ ~ 90 ℉). If the room temperature is above this, please open the front cover to maintain print quality.
• After the print is finished, the object may be removed with a scraper.
• When using different types of filament, we recommend changing the extruder module.

Load Filament

Last updated on May 23rd, 2018 at 11:06 am

Open the Dashboard

Click File > Print > da Vinci Printer Plugin > Dashboard

The dashboard is the interface where you can initiate cleaning, calibration, and load/unload filament functions.

Note: When using different types of filament, we recommend changing the extruder module.

page10_step2_US

 

Image 4

 

 

 

 

 

 

 

 

 


Click Filament > Load Filament

Image 5

 

 

 

 

 

 

 

 

 

 

 


Follow the onscreen instructions to load the filament

Image 6

 


 


Take the tip of the filament and insert it into the feeding hole. The printer will start to load the filament automatically.

圖9_BW


When a constant stream of filament is coming out of the extruder module, click FINISH.

Maker:S,Date:2017-11-29,Ver:6,Lens:Kan03,Act:Lar02,E-Y

load filament_complete

Software Setup

Last updated on May 23rd, 2018 at 10:55 am

XYZmaker

XYZmaker is a software that is used to operate the da Vinci nano/ da Vinci nano w and prepare 3D models for printing.

Note: First-time installation requires an Internet connection. To control the da Vinci nano/ da Vinci nano w, you need to connect it to a computer with XYZmaker installed.

Download XYZmaker software

Click here to download the software

Image 1

 


 

Install XYZmaker 

Open XYZmaker and install it on your computer

Image 2

 

 

 

 

 

 

 


Connect USB and power cable

Connect the da Vinci nano/ da Vinci nano w to your computer via USB

USB

 

 

 

 

 

 

 

 

 

 

 

 

 


Turn on the 3D printer

turn on

 

 

 

 

 

 

 

 

 

 

 

 

 


Open XYZmaker and check that you’re connected to the da Vinci nano

Open XYZmaker and click File > Print > da Vinci Printer Plugin
This will display a print screen that lets you set print settings and prepare your printer.

page10_step2_US

 

 

 

 


Open Dashboard 

The dashboard is the interface where you can initiate cleaning, calibration, and load/unload filament functions.

Image 4

 

 

 

 

 

 

 

 

 

 

 


There should be a green circle showing that you are connected to the da Vinci nano.

Image 7

Hardware Setup

Last updated on April 10th, 2019 at 09:27 am

Install the Guide Tube and Extruder Module

Insert guide tube into the extruder port

Image 001

 

 

 

 

 

 

 

 

 

 


Press the white button and align the extruder module with the bracket. Once aligned, release the white button to connect the extruder module with the bracket.

圖2_BW


Connect the flat cable to the extruder module. (Be sure to insert the flat cable in the right direction.)

圖3_BW


Use the cramp ring to hold the filament guide tube and flat cable. (Place the cramp ring on the flat cable marker.)

P4_04

 


Feed the guide tube through the top cover

Image 002

 

 

 

 

 

 

 

 

 


Attach the top cover to the machine

Image 003

 

 

 

 

 

 

 

 

 


Rotate the cover

Direct the bottom locking catches toward their slots, then press the tab to rotate clockwise.

Image 004

 

 

 

 

 

 

 

 


Ensure that the guide tube has been tightly inserted into the feed module port.

 

 

install filament

 


Place filament  on the spool holder

The filament spool holder is located on the back side of the printer.

Note: The da Vinci nano/da Vinci nano w comes with a pre-assembled filament spool. The white spool ring has a sensor chip that tracks the amount of filament left to print with. When you purchase new filament you will need to load the new sensor chip here.

20171127_NANO 白灰.3517_1205

 


Cut the tip of the filament at 45° and insert it into the feeding module hole

cut the filament

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Open the hold-open component and take out the print bed.

da-Vinci-nano_platform


Stick the bed tape onto the print bed. (align center)

7125

 


NOTE:

• The filament will load better when the tip of the filament is cut at a 45° angle.
• When the printer is not in use, raise the filament spool.
• If the room temperature is below 25℃/ 77°F, apply some glue to the bed tape for better part adhesion.

Unboxing

Last updated on May 23rd, 2018 at 10:39 am

Open box and remove accessories  

Remove the accessories and foam block covering the da Vinci nano/ da Vinci nano w and place them to one side.

Note: Keep the original packaging materials in case you need to send your unit back for repair during the warranty period. If other packaging materials are used instead, the printer may become damaged during transportation. In such a situation, XYZprinting reserves the right to charge a repair fee.


Take out the accessories, top cover and printer.

Image 001

 


Remove the styrofoam packing material on sides and the plastic bag.

Image 002

 

 

 

 

 


Remove the fixed tape from the printer bottom and take out the filament.

Image 003

 

 

 

 

 


Remove fixed tape on front cover sides

unbox07


Remove the fixed tape on the extruder module and print bed packaging.

Unpacking05_BW

 


Push the extruder module mount to the side and remove the packaging foam from underneath it.

Remove any remaining fixed tape and packaging.Please remove all fixed materials before turning on the printer to prevent the machine from damage.

P1040222


Check that all the accessories are there by checking the image below. 

accessory

  1. Quick guide & warranty card
    ——————————————
    Printing Accessories:
  2. Scraper
  3. USB wire
  4. Guide tube
  5. Bed tape x 3
  6. Power adapter
  7. Power cord
  8. Bundled filament
    ——————————————
    Machine Maintaining Accessories:
  9. Feeding path cleaning wire
  10. Nozzle cleaning wire x 5
  11. Cleaning brush
  12. Feed module port