Design Specs

For the ideal printing result and the complete output of design details, please follow below design specifications when designing the models.

Print Material: General purpose resin for XYZprinting Nobel series printer

Index	Features		Recommended
A	Wall thickness	Walls thinner than recommended may warp or break during the peel process.	≥0.5mm
B	Overhang angle	Support structures are required for steep overhangs with an angle larger than recommended limits. Otherwise the overhangs may deform or break.	≥20°
C	Minimum Vertical-Wire Diameter	Nets or wires thinner than recommended may break or deform during the peel process.	≥0.3mm
D	Hole Diameter	Holes smaller than recommended may trap resin in the object or may close off during printing.	≥1.2mm
E	Clearance	Clearance smaller than recommended may fuse during printing. Moving parts may thus become non functioning.	≥0.3mm
F	Embossed Detail	Such details smaller than recommended in height and thickness may not be visible on the print.	≥0.1mm
G	Engraved Detail	Such details smaller than recommended in height and thickness may not be visible on the print.	≥0.3mm

Note
⋅The recommendation is based on the printing result with XYZprinting general purpose resin at layer height of 0.1mm.
⋅Print quality may be affected when printing with a cloudy resin tank.
⋅Please post cure the printouts with UV Curing Chambers to increase the hardness and durability of the printed products.