Open Printer monitor
Click on the Printer monitor icon in the bottom-right of the screen.
Click Filament to access all the filament options
Click Load filament
Click Start and follow the onscreen instructions
Month / July 2016
操作功能總覽
Getting to know your printer
- Guide tube
- Feed module
- Filament
- Power connector
- USB port
- Power switch
- LED button
- Extruder module
- Print bed
- Maintenance cover
LED button and indicator
Solid green: Ready to print.
Flashing green: Receiving data.
Solid red: General error, press to cancel the print and refer to instructions in the software to fix the issue.
Flashing red: Critical error, refer to instructions in the software to solve the issue or reboot the Mini.
Solid orange: Printing, press the button to pause. To cancel, press and hold for 5 seconds.
Flashing orange: Paused, press the button once to resume.
Pulsing orange: Print complete, remove the object and press the button once to return to green status.
Specifications
Dimensions: 400 x 336 x 362mm
Weight: 8 kg
Print technology: Fuse Filament Fabrication (FFF)
Print material: PLA
Filament diameter: 1.75mm
Nozzle diameter: 0.4mm
Print dimension: 150 x 150 x 150mm
Print resolution: 0.1/0.2/0.3/0.4mm
Connectivity: USB 2.0 / Wi-Fi
Print software: XYZware
File format: STL/3W
列印
Warning: There are 4 orange clips attached to the Mini’s Z-axis shaft that support the X-axis and extruder mount. These need to be removed before operating the machine or it will be unable to print.
Import a 3D model into XYZware
Open XYZware, click Import and select a .stl file.
Click Print
Depending on what filament you have loaded the da Vinci Mini will use its default settings. Click Advanced to adjust the different printing parameters.
Congratulations!
After the print is complete, use the supplied scraper to remove the 3D model.
載入線材
Open Printer monitor
Click on the Printer monitor icon in the bottom-right of the screen.
Click Filament to access all the filament options
Click Load filament
Click Start and follow the onscreen instructions
When a constant stream of PLA is coming out of the extruder module, click FINISH.
軟體設定
To control the da Vinci Mini, you need to be connected it to a computer with XYZware installed.
Click here to download the software or go to XYZprinting.com to download the latest version of XYZware.
Install XYZware
Open XYZware and install it on your computer
Connect USB cable
Connect the da Vinci Mini to your computer via USB
Power on
Turn on the da Vinci Mini
Open XYZware and check that you’re connected to the da Vinci Mini
Click on Printer monitor and wait for the da Vinci Mini to connect
硬體設定
列印模組安裝
安裝線材導引管
安裝線材中心環
安裝線材
開箱
Unboxing
Before using the da Vinci Mini, remove all packaging from the printer. Turning on the Mini without removing these fixed materials may damage it.
Remove the 4 shaft clips as illustrated
After unboxing check the list below to ensure all parts are there.
Getting to know your printer
快速設定影片
總覽
