列印

Warning: There are 4 orange clips attached to the Mini’s Z-axis shaft that support the X-axis and extruder mount. These need to be removed before operating the machine or it will be unable to print.

unboxing 7-01


Import a 3D model into XYZware

Open XYZware, click Import and select a .stl file.

Printing_01


Click Print

Depending on what filament you have loaded the da Vinci Mini will use its default settings. Click Advanced to adjust the different printing parameters.

Printing_02


Congratulations!

After the print is complete, use the supplied scraper to remove the 3D model.

Printing_03