XYZware Pro. With the promotion of da Vinci 1.0 Professional flagship 3D printer (hereinafter called da Vinci 1.0 Pro), the advanced 3D print software “XYZware Pro” is also released simultaneously for XYZware. The new version of XYZware Pro is as user friendly as the previous one. Nevertheless, it includes many professional capabilities in this version. ..
Category : 3D Scanner
Home » Archive by category : 3D Scanner
XYZware Color Mode The multi-color printing described in this chapter is used in combination with specific models. Users can adjust the color mixing ratio based on their color preferences in XYZware. During the printing process, there may be a difference between the color mixing ratio displayed by XYZware and the actual object due to the ..
There is no excerpt because this is a protected post.
There is no excerpt because this is a protected post.
How to scan: Body Mode Get to know the optimized scanning speed for Body Mode, you can digitize a human body or large object in a few minutes. Note: The person being scanned should hold as still as possible throughout the scanning process to achieve a good scan. Tip: When scanning a human body or large ..
Scan Tip: Continue the Scan 3D model is made up of sequential images took by the scanner . The scanning frame rate is up to 30 frames per second (30 FPS). While shooting new images, the scanner identifies distance information about the surface in its view, and combine the shared features in every images into polygon mesh.”Lost ..
Other Information: Output File Format After a scan is done, XYZscan will display colored 3D mesh at first. You may press this icon to disable the color texture to view the model in detail. To save the file, press this icon, followed by selecting either colored (.obj) or monochromatic (.stl) file format f..
Scan Skill: Light in Scan Environment Uneven lighting in the scan environment does not influence the capture of an accurate 3D mesh, but may lead to uneven color texture for the result.To obtain the optimal colored 3D image, scans should be performed in a controlled environment with even lighting.An accurate 3D model can be generated even if the lighting ..
Scan Tip: Hold the Scan Target Still During 3D scan, the scanner will shoot successive images, and generate a 3D model by analyzing and stitching the common features of each images.If the posture or the position of the target is changed in the scanning process, the scanner may not stitch the 3D model correctly and generate unexpected scan result. Thus, ..
Scan Tip: Improve the Orientation of the Scanner After initiating the scan, the scanner will take serial images, align the features in the 2D pictures, and stitch them into scanned geometry immediately.To get a complete scan, the orientation of the scanner is the key. The 3D scanner orients itself by recognizing the features on the surface.The noticeable features are using ..