Scan Tip: Continue the Scan 3D model is made up of sequential images took by the scanner . The scanning frame rate is up to 30 frames per second (30 FPS). While shooting new images, the scanner identifies distance information about the surface in its view, and combine the shared features in every images into polygon mesh.”Lost ..
Other Information: Output File Format After a scan is done, XYZscan will display colored 3D mesh at first. You may press this icon to disable the color texture to view the model in detail. To save the file, press this icon, followed by selecting either colored (.obj) or monochromatic (.stl) file format f..
Scan Skill: Light in Scan Environment Uneven lighting in the scan environment does not influence the capture of an accurate 3D mesh, but may lead to uneven color texture for the result.To obtain the optimal colored 3D image, scans should be performed in a controlled environment with even lighting.An accurate 3D model can be generated even if the lighting ..
Scan Tip: Hold the Scan Target Still During 3D scan, the scanner will shoot successive images, and generate a 3D model by analyzing and stitching the common features of each images.If the posture or the position of the target is changed in the scanning process, the scanner may not stitch the 3D model correctly and generate unexpected scan result. Thus, ..
Scan Tip: Improve the Orientation of the Scanner After initiating the scan, the scanner will take serial images, align the features in the 2D pictures, and stitch them into scanned geometry immediately.To get a complete scan, the orientation of the scanner is the key. The 3D scanner orients itself by recognizing the features on the surface.The noticeable features are using ..
Scan Tip: Colors and Materials that are Difficult for Scanning The accuracy of laser scan is susceptible to some colors and materials due to the limitations of the scanning technology.However, you can still achieve a good scan by applying the skills for scanning the targets with following conditions, or pre-treating the surface of the scan target when capable. Reflective and transparent surface On scanning ..
How to Scan: Object Mode Learn how to focus on the object and get to know the scan tips for all kinds of features on the target, you can digitize your objects easily. Scanning steps: 1. Focus on the scanned object Scan area for the Object Mode is 60 x 60 x 30 cm (width x depth x height). When using ..
How to scan: Head Mode Learn the tips on measuring the scan area of Head Mode and reduce the factors that may affect the scan result, you can make the digitized replicas easily. Note: The person being scanned should hold as still as possible throughout the scanning process to achieve a good scan. Tip: In ..
..
..