Software Setup

Last updated on May 23rd, 2018 at 10:55 am


XYZmaker is a software that is used to operate the da Vinci nano/ da Vinci nano w and prepare 3D models for printing.

Note: First-time installation requires an Internet connection. To control the da Vinci nano/ da Vinci nano w, you need to connect it to a computer with XYZmaker installed.

Download XYZmaker software

Click here to download the software

Image 1



Install XYZmaker 

Open XYZmaker and install it on your computer

Image 2








Connect USB and power cable

Connect the da Vinci nano/ da Vinci nano w to your computer via USB















Turn on the 3D printer

turn on














Open XYZmaker and check that you’re connected to the da Vinci nano

Open XYZmaker and click File > Print > da Vinci Printer Plugin
This will display a print screen that lets you set print settings and prepare your printer.






Open Dashboard 

The dashboard is the interface where you can initiate cleaning, calibration, and load/unload filament functions.

Image 4












There should be a green circle showing that you are connected to the da Vinci nano.

Image 7