To export your stl file into sliced file or to print, you will need to go through the following setup. Once setting up all items, press “Export” or “Print” to proceed.

Click on below items to read more information on each setting:

Note 
Detailed instructions on using the resins are available. To read more on the material, click below links or the bulb icon by material. 
» Nobel 1.0/1.0A - Standard resin 
» Nobel 1.0/1.0A - Flexible resin 
» Nobel 1.0A - Castable resin
» Nobel Superfine - Standard resin
» Nobel Superfine - Castable resin 

Note
Layer resolution allowed on Nobel 1.0A varies based on the total height of the object.
» 25 microns; maximum allowed height: 50 mm
» 50 microns; maximum allowed height: 100 mm
» 100 microns; maximum allowed height: 200 mm

Note
If the selected printer model is different from the printer connected, print job submission will be canceled.

Read the following safety instructions and contents of this manual before use, operation, maintenance, replacement or removal of any parts, components, or materials of the printer.

Safety and Compliance

For the latest information about the Nobel 1.0A 3D Printer and XYZprinting products, please visit XYZprinting website or contact the customer service.
The instructions have been written in order to cover all possible printing scenarios. For scenarios which occur outside the scenarios detailed in the instructions, the user will be held accountable for their own safety.

Important Safety Information

– Do not let children operate this device without adult supervision. Moving parts may cause serious injury.
– Electric shock hazard.
– Do not place the printer on an unlevel or unstable surface. Printer may fall or tumble causing harm and/or injury. Also tank level detection may be inaccurate.
– Do not place any object on top of the printer. Liquid and solid objects that fall into the printer may lead to printer damage or safety risks.
– Please keep the printer, resin, or alcohol away from fire.
– Do not disassemble or replace the printer cover with non-XYZprinting covers.
– Insert and secure the power cord firmly for proper usage and to avoid potential electricity and fire dangers.
– Do not attempt to service the printer beyond the instructions specified in this tutorials. In the case of irrecoverable problem, contact XYZprinting service center or your sales representative.
– Do not place the printer in humid or dusty environments such as bathrooms and high traffic areas.
– Some components of the printer move during operation. Do not attempt to touch or change anything inside before powering off the printer.
– Please keep the lid closed during printing to avoid injury.
– This printer is a Class 1 Laser Product. A Class 3B laser module is used as a light source. Never disassemble the product.
– For optimized printing quality, only use resin supplied by XYZprinting.
– Make sure to set the power switch to the off position and remove the power cord before transporting the device.
– Only use the grounded power adapter and power cord supplied with the printer to prevent possible electrical shocking.
– Please place and use the printer in a well ventilated area. The process of printing will produce a small amount of non-toxic odor. Having a well ventilated area will ensure a more comfortable environment.

Resin Care

– Wear proper protective equipment, avoid raw material contact and vapor inhalation.
– Chemical-resistant gloves should be worn when you make contact with resin.
– Avoid exposing resin to high temperatures, localized heat sources (i.e., drum or band heaters), oxidizing conditions, freezing conditions, direct sunlight, ultraviolet radiation, inert gas blanketing.
– Never pour the waste resin back to the bottle or down the sink, as it may pollute the remaining resin or clog the drain.
– You may pour resin waste into plastic bag and expose it to sunlight or UV light source to cure the resin. The cured resin can then be discarded.
– Avoid dripping resin on anything other than the platform or the resin tank, or the printer may malfunction.
– The stability of printing quality is affected by temperature and humidity. Please ensure that the recommended operating conditions are adhered to (Operating temperature 18-28℃ (64.4-82.4℉)/humidity 40-80% RH; If a different operating temperature is printed on the label on the resin bottle, please adhere to recommended conditions on the label.)

Resin Tank Care

– Due to the nature of the print technology and material, the resin tank may develop cloudy regions overtime where the laser cures the resin frequently and may lead to print fails. Moving the print location around the platform can help prolong the life of the tank.

– Avoid printing over cloudy area in the tank. Laser power may be reduced by the cloud. This may decrease the adhesion between the model and the
platform.
– Change to a new tank when over 2/3 of the surface gets cloudy.
– Use an isolate resin tank when using resin of different colors. Mixing resin of different color may affect printing quality.
– Sift any residue or cured debris from the tank with the scraper, high-density filter or other tools. Resin can be reused after filtering.

Copyright

All other trade names and trademarks are properties of their respective owners.

To print with Nobel printers, please first install XYZware_Nobel on your device. “XYZware_Nobel” Installer can be found in the bundled USB drive in the package of the printer or at XYZprinting website.

Note 
Login in XYZprinting member is required to download the software.

Compatible printer model

XYZprinting Nobel 1.0

XYZprinting Nobel 1.0A

XYZprinting Nobel Superfine

System requirements

Supported file type

Most operations of the printer are activated with the LCM menus. Below is the description on the function of each item in the menus.

(A) Page 1

(B) Page 2. Press to go to page 2 on the printer screen.

UTILITIES

“Utilities” menu provides the control of the printer. You can instruct to fill the resin tank manually, and calibrate the printer when necessary.
Below is the list of functions under the Utilities menu:

Note
» “Auto Fill” function is enabled by default. You may skip loading resin manually when auto-fill is enabled.
» Shake the resin bottle well before use to ensure an even color.
» The printer detects the tank level after "Install Resin" is activated. Resin will be filled only when the tank level is low.

Note
» Click here to read step-by-step instructions on platform calibration. 
» Always calibrate the platform after changing to a new tank or a tank or a platform different the one used for last print.

SETTINGS

The Settings menu allows you to adjust printer settings, including below items:

(A) Page 1

(B) Page 2. Press the down key to go to page 2 on the printer screen.

Note
» Be sure to place the printer on a leveled surface, or tank level detection may be inaccurate. 
» Auto-fill will be switched off when the timeout expires. Timeout may be caused by an empty resin bottle or the tank level sensor soaked by resin. Please replace the resin bottle or clean up the level sensor before enabling the function.

INFO

Under “Info” menu, you can check the statistics and firmware version of the printer, status of resin bottle installed, and information on XYZprinting.

(A) Page 1

(B) Page 2. Press  to go to page 2 on the printer screen.

PRINT FROM USB

Insert USB flash drive to the USB drive port at the back of the printer, and select “PRINT FROM USB” on the printer.

Press on the printer to browse the menu, and press to select a file to print.

Note: 
» Please slice the 3D model with XYZware_Nobel and save it in .3wn format. Files in other format or not sliced with XYZware_Nobel will not be shown. (Read more)
» For correct file name display, please name the file with English and Japanese (Katakana preferred) alphabets and numbers.
» Sample files are provided in the bundled USB drive. To print the sample, please slice the stl files with XYZware_Nobel before printing, or selected the sliced .3wn files.

Tank Installation

Install the resin tank by pushing the tank all the way into its slot.

Calibration

Platform calibration ensures the platform is parallel with the resin tank for more stable printing performance. If the platform is not calibrated, objects may fall during printing.

Note
•Click here to read step-by-step instructions on platform calibration.
•Always perform platform calibration after changing to a new tank or a tank or a platform different the one used for last print.

Resin Bottle Installation

Shake the resin cartridge for about 10 seconds.

Assemble the nozzle cap and the inner tube and replace the bottle cap with the assembled nozzle cap.

Insert the resin bottle into the cartridge slot and install the filling tubes by first connecting the black tube to the thick nozzle. Then attach the transparent tube to the thin nozzle and push the tube all the way down.

Note
“AUTO FILL” is enabled by default. The resin tank is auto-filled before printing and when resin low is detected. You don’t need to fill the tank manually.
Before changing the resin bottle, please detach the transparent tube from the cap and then the black tube.

Connect to PC

Connect the printer to your PC via USB wire.

Note
USB wire port is at the back of the printer.

Software Setup

The printing software, XYZware_Nobel, is essential when printing with the Nobel printers.
“XYZware_Nobel” Installer can be found in the bundled USB drive in the package or at XYZprinting website:

Note
Login in XYZprinting member is required to download the software.
Apply printer firmware and XYZware_Nobel updates when prompted by the software for stable printing performance.

Follow the video to unpack your printer.

Note
Keep original packaging material in the event of sending your unit back for repair.

Unlock the printer

Lay down the printer, and release the printing module locker by pushing it to the right.

Accessories

Nobel 1.0A is shipped with the following parts and accessories.

Note
After unpacking, please inspect the interior and exterior of the printer and accessories for damage. Please contact support for any missing or defective parts and accessories.

Remove the protective foam under the platform

Connect the power source to the printer and power on the printer.

On the printer, select “UTILITIES” > “MOVE PLATFORM”>“TO TOP”>“YES” to raise the platform.

Remove the protective foam from the tank slot.

Assemble the lid

Assemble the top case by following the instructions in the box and the video below.

Platform calibration ensures the platform is parallel with the resin tank for more stable printing performance. If the platform is not calibrated, objects may fall during printing.
Always perform platform calibration after changing to a new tank or a tank or a platform different the one used for last print.

To ensure the effectiveness of the calibration, you may use the special-designed jig while operation.

About the jig for platform calibration
» Click here to download the stl file and print 2 copies.
» The jigs can be printed with standard resin.

How to calibrate the platform?

On the printer, select “UTILITIES” > “”HORIZON CALIB” and “Yes”, and press [OK] to begin.

When “REMOVE OBJECT FROM PLATFORM” is displayed, check and remove the residues on the platform or in the tank, if any, and press [OK] to proceed.

Loosen 4 screws by the platform holder, press [OK] and wait until the platform has descended to the bottom.

Place the jigs on the right side of the metal frame, at the location as illustrated.

When the jigs are placed correctly, the black frame should stay in place when the right side of the resin tank is pressed down.

Press the platform slightly with both hands.

Hold down one side of the platform while tightening 2 screws on the opposite side, and continue on tightening the screws on the other side.

Note
» To ensure the leveling of the platform, be sure to hold down the platform from the opposite side when tightening the screws.

Finally tighten the screws with a coin or other tools. Be sure to hold down the platform at the same time.

Remove the jigs for calibration, press [OK] on the printer, and the printer is ready for next print.

Tutorial video on platform calibration

Note
If the subtitle is not displayed while playing, press the button "CC" at the bottom of the video to enable to subtitle.

Nobel 1.0A용 모델 디자인 사양

모델을 디자인할 때 이상적인 프린팅 결과와 디자인 디테일의 완벽한 출력을 위해,아래의 디자인 사양을 따르십시오.

프린팅 재료: XYZprinting Nobel 시리즈 프린터용 범용 수지

참고•권장 규격은 XYZprinting 범용 수지를 0.1mm의 레이어 높이에서 사용했을 때의 프린팅 결과를 기초로 산출했습니다.•탁한 수지 탱크를 이용해서 프린팅할 경우 프린팅 품질이 영향을 받을 수 있습니다.•프린팅된 제품의 경도와 내구성을 높이려면 UV 경화기를 이용해서 출력물을 후경화하십시오.

Applicable printer: Nobel 1.0A

Standard resin provides a wide range of applications and moderate rigidity, making it suitable for general design outputs and engineering design prototyping.

For the ideal printing result and the complete output of design details, please follow the design specifications here when designing the models.

Recommendation on Finishing

Please refer to the complete guide here for post-processing.

Applicable printer: Nobel 1.0A

The properties of the castable resin are similar to those of wax. There is no ash residue after it is heated and it is suitable for lost wax casting, saving procedures, i.e. wax carving used in the conventional production process.

Model Design Tips

The properties of the castable resin are similar to those of wax in that both are structurally soft and brittle and the printout can be easily broken due to pulling force during the printing process.

For the ideal printing result and the complete output of design details, please consider the design specifications when designing the models.

» Minimum Vertical-Wire Diameter ≥0.8mm

» For the specs for other features, please follow the general design specs here.

Note
» Larger objects of dimension larger than 60x60x120 mm or a weight exceeding 10g may require more supports to stick to the platform.

Recommendations on Printing Setup

As with the use of the resin for general purpose, when there are overhangs in the model, or when the area of contact with the platform is small, additional support structures are required to ensure that the object can be printed out completely. The printing software XYZware_Nobel has an “automatic support” function, which can be used to analyze the structure of the model and automatically generate bracing structures. Sometimes you may need to use the “manual” mode to add more supports to ensure the adhesion of the object.

Click here for the instructions for support functions.

If printing fails, please change the object’s position and adjust the setup of the angle and the bracing structures.

Recommended Burnout Process for Lost Wax Casting

When casting the printouts, you can work based on the temperature control suggestion as described in the following diagram, in order to ensure the complete burning away of the resin and a smooth and unblemished surface of the casting object.

Recommendation on Finishing

Cleaning

After removing the printed object from the platform, please clean it with ethyl alcohol of concentration greater than 95%. During the cleaning process, you are recommended to use a scoop net to hold the printed item and to sway the scoop net in the alcohol in order to clean the resin residue from the surface of the printed item.

Scoop up the printed item from the alcohol after it is cleaned and wait for the alcohol on its surface to evaporate away.

Note
» Because of the brittleness of this resin, do not use a brush to scrub the printed item. Doing so may scratch the surface of the printed item.
» Do not immerse the printed item in alcohol for longer than over 10 minutes, or the alcohol may erode the item's structure and damage the item.
» It is normal for there to be fading after the printed item is immersed in alcohol. The fading will not affect the result of the casting.

Air-Dry the Alcohol on the Surface

There will be alcohol residue on the surface of the printed item after it is washed.Please keep the printed item still after it is washed and do not perform post-curing until you have confirmed that the alcohol has completely volatilized. After the alcohol has air-dried, please check carefully whether there is any resin residue in the features. Please make sure to remove the uncured resin to prevent it from blocking the design details of the original model.

Note
» If curing is performed when alcohol residue is still present on the surface of the printed item, the surface of the printed item will appear white and misty, possibly affecting the result of casting.
Tip
» The color of the printed item will fade slightly after the item is immersed in alcohol. After the alcohol has air-dried, the item will return to its original light orange color. Consequently, you can use the color of the printed item to determine whether the alcohol has air-dried.

Removing the Support

Please use tools to cut off the support instead of pulling directly (pulling can easily damage the item’s surface).

Post-Curing

The printed item produced from the castable resin must post cured using UV light to ensure the hardness for the lost wax casting.

Click here to read the curing profile for using XYZprinting UV Curing Chamber (Model: 3UD10).

Preservation of the Uncured Resin

Uncured resin inside of the resin tank should not be exposed to light. The uncured resin can be stored in an opaque container after it is filtered. Pour the resin back into the resin tank prior to the next printing.

Note
» Opaque polypropylene containers are recommended for storing the resins.